Residential Roof Replacement
Most of a roof replacement happens out of sight from the driveway. Follow our crew from the first inspection down to the wood decking, then see what goes beneath the new shingles and how the roof looks from the street.
Chapter 1
Inspecting the original roof
Look just above the chalk lettering. The circle marks a spot our crew documented on the right side of the roof so the homeowner could see it up close.
On the back slope, the wider view shows several circled spots. The vent gives the homeowner a reference point for finding those areas in the inspection photos.
We labeled the front slope separately. Recording our observations one side at a time makes it easier to walk the homeowner through what we found.
Chapter 2
What goes beneath the shingles
Removing the old roofing reveals the wood deck. This is when our crew can check the surface that will support the new roof.
Here you can see the seams between the wood panels and the places where pipes pass through the roof. Both are usually hidden from view once the roof is finished.
This photo catches two stages side by side. The wood deck is still visible in the center, while gray GAF FeltBuster underlayment covers the adjoining slopes. The new shingles are stacked in the foreground.
The gray underlayment now stretches across the main slope. Once the shingles go on, this layer will sit between them and the wood deck.
Chapter 3
The finished roof
Back at the driveway, you can see the finished shingle pattern across the garage and the higher roof behind it. The decking and underlayment shown earlier are now beneath those shingles.
Chapter 4
A closer look at finished rooflines
The raised line in the foreground is called a hip. Overlapping cap shingles follow the edge where the two roof slopes meet.
Look just to the left of the raised hip. The inward angle where the shingle rows meet is the valley. This view shows both details side by side.
Have questions about your own roof?
